Hitch-Hiker ComboThis is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the contact pins on an NL2/combo connector an the other two contacts of th first NL4 connector (2+, 2-) and connects them to the contact pins of a second NL2/combo connector. This has the same wiring as a DISTRO that uses all NL4's -- Applications: This enables two (2) full range speakers to be connected to a single four conductor speaker cable (combining two speaker cables into one). Based on its Parent Product - Cable Cube - in a new stainless steel package that bolts on to one side of a rack rail conveniently securing it to the rack.
•
Hitch-Hiker Combo RevThis is the same s the HH COMBO but reversed within the enclosure to allow two amp channels to combine into a single NL4 connector on the front panel.
•
Hitch-Hiker DistroThis is a break-out box that connects the first tow contacts (pin1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of oa NL4 and the other two contacts of the first NL4 connector (pin 2, 2-) and connects them to the first tow contacts (pin 1+, 1-) of a second NL4 connector. This has the same wiring as a COMBO that uses all NL2/Combo connectors. Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
•
Hitch-Hiker Distro RevThis is the same as the HH DISTRO but reversed within the enclosure to allow two amp channels to combine into a single NL4 connector on the front panel.
Based on its Parent Product Cable Cube - in a new stainless steel package that bolt on to one side of a rack rail convienently securing it to the rack. REV- when bolted to the rack it is the REVERSE of the inlet and the outlet of the connectors when compared to the regular Distro.
•
Hitch-Hiker iDR 4This is a 2U mini install Panel that provides 2 'D' size connector holes (Picture shows 2x NL4 connectors, panel is sold without connectors) on the front panel and a top & bottom lacing panel for fastening the wiring harness.
i - is for Install cable strain relief. DR is for Double connector rack mount with stain relief holes for plastic ties.
•
Hitch-Hiker iDR 4 / 8 Side Plate AccessoryThis is a cosmetic side plate for the iDR8 & iDR4, for those who require a more finished look, hiding the lacing bar and the back of the connectors.
•
Hitch-Hiker iDR 8This is a 2U mini install Panel that provides 2 'NL8' size connector holes on the front panel and a top & bottom lacing panel for fastening the wiring harness. (Panel is sold without connectors)
i - Is for Install cable strain relief. DR-is for double connector rack mount with strain relief holes for plastic ties.
•
Hitch-Hiker MatrixThe MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4
•
Hitch-Hiker PCE-LThis is a simple yet elegant power connection for a small equipment rental rack. PowerCon® In and Thru with indicator lamp on the front panel. Nothing is on the back panel to interfere with equipment in the front of the rack. On the side of the PCE-L is a Hubbell 20 Amp T-slot duplex receptacle. (Note the E = Edison & the L = Left hand side mount to rack)
•
Hitch-Hiker PCE-RThis is a simple yet elegant power connection for a small equipment rental rack. PowerCon® In and Thru with indicator lamp on the front panel. Nothing is on the back panel to interfere with equipment in the front of the rack. On the side of the PCE-R is a Hubbell 20 Amp T-slot duplex receptacle. (Note the E = Edison & the R = Right hand side mount to rack)
•
Hitch-Hiker PCE-SLThis is a simple yet elegant power connection for a small equipment rental rack. PowerCon® In and Thru with indicator lamp on the front panel. On the back panel of the PCE-SL is a Hubbell 20 Amp T-slot duplex receptacle. (Note the E = Edison, the S = Straight pass thru & the L = Left hand side mount to rack)
•
Hitch-Hiker PCE-SRThis is a simple yet elegant power connection for a small equipment rental rack. PowerCon® In and Thru with indicator lamp on the front panel. On the back panel of the PCE-SR is a Hubbell 20 Amp T-slot duplex receptacle. (Note the E = Edison, the S = Straight pass thru & the R = Right hand side mount to rack)
•
Hitch-Hiker QuadThe QUAD is a simple NL4 'Y' Splitter. Three (3) NL4's parallel connected together. Applications: Primarily used for splitting an NL4 cable (paralleling Bi-amplified speakers).
•
Hitch-Hiker TwinThe TWIN is a simple NL2/combo connector splitter. Three (3) NL2/combo connector's parallel connected together.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.
