SLP-231 (SKU: 77231)The SLP-231 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L14-30 for a Main Inlet connector with a paralleled Outlet (pass through) connector for daisy connectivity of racks. There are two 20 Amp electrical circuit breakers on the front panel, each of which are connected to one of the two ( X & Y ) phases of the main power inlet connector. Each circuit breaker is connected to a pair of T-slot U-ground duplex receptacle outlets located on the rear panel.
SLP-232 (SKU: 77232)The SLP-232 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L14-30 for a Main Inlet connector. There are two 20 Amp electrical circuits connected to each of the two ( X & Y ) phases of the main power inlet connector. Each of the four circuit breakers supply a T-slot Uground duplex receptacle located on the rear panel. Two of the four independent circuit breakers distribute power from each phase of the inlet connector to each half of the split T-slot duplex convenience outlet on the front panel.
SLP-234 (SKU: 77234)The SLP-234 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L14-30 for a Main Inlet connector. There are two 20 Amp electrical circuit breakers on the front panel each of which are connected to one of the two ( X & Y ) phases of the main power inlet connector. Each breaker independently distributes power to a T-slot duplex U-ground receptacle on the rear panel which is also parallel connected to one half of the split T-slot duplex U-ground convenience receptacle located on the front panel.
SLP-235 (SKU: 77235)The SLP-235 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L14-30 for a Main Inlet connector. There are four 20 Amp electrical circuit breakers on the front panel, two of these breakers are connected to the ‘X’ phase and two to the ‘Y’ phase of the main power inlet connector. Each breaker independently distributes power to each half of a pair of split T-slot duplex U-ground receptacle for a total of four independent circuits or outlets on the rear panel.
SLP-237 (SKU: 77237)The SLP-237 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L14-30 for a Main Inlet connector. There are two double 15 amp breakers and two single 20 Amp breakers located on the front panel. Both of the double 15 Amp breakers independently supply power to duplex twist-lock outlets located on the rear panel. Each of the remaining two 20 Amp single breakers are connected to one of the two ( X & Y ) phases of the main power inlet connector and distribute power to T-slot duplex U-ground receptacles located on the rear panel.
SLP-238 (SKU: 77238)The SLP-238 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L14-30 for a Main Inlet connector. There are six independent 20 amp breakers located on the front panel. Each of the X1, X2, Y1 & Y2 breakers distribute power to four T-slot duplex U-ground receptacles located on the rear panel. The remaining X3 & Y3 breakers distribute power to a split T-slot duplex U-ground convenience receptacle located on the front panel.
SLP-335 (SKU: 77335)The SLP-335 is a 2U high 19" rack mount (220 Volt 30 amp 3Ø) power distribution bar. This model has a NEMA L21-30 for a Main Inlet connector. There are four 20 Amp independent circuit breakers on the front panel, each of which are connected to one of the three phases ( X, Y & Z ) of the main power inlet connector. The X2 & Y2 Phase breakers distribute power to a split T-slot duplex U-ground receptacle located on the rear panel and Y1 & Z1 distribute power to a split T-slot duplex U-ground receptacle located on the rear panel…
SLP-337 (SKU: 77337)The SLP-338 is a 2U high 19" rack mount (220 Volt, 30 Amp, 3�) power distribution bar.
SLP-338 (SKU: 77338)The SLP-338 is a 2U high 19" rack mount (220 Volt, 30 Amp, 3�) power distribution bar. This model has a NEMA L21-30 for a Main Inlet connector. There are six independent 20 amp breakers located on the front panel. Each of the X1 & Y1 breakers distribute power to a T-slot duplex U-ground receptacle located on the rear panel. In addition, the X2 & Y2 breakers distribute power to a split T-slot duplex U-ground receptacle located on the rear panel which is also parallel connected to a split T-slot duplex U-ground convenience receptacle located on the front panel.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.
