The NEW PowerCON TRUE 1 POWER CUBE® TPC-6 - Male SOCA to six NAC3FPX outlet connectors
 |
 |
|
Click to enlarge image(s)
|
SPECIAL ORDER -- Power Cube® TPC-6 is a passive Male SOCA to PowerCON TRUE1 (120 Volt Single Phase A/C -- 240V ) Splitter device, containing no active components or supplementary circuit interrupter (breaker) devices inside. The PowerCON TRUE1 connector series enables the user to disconnect the power cables while under load. For public safety, The TX4 is built in our proprietary custom aluminum extrusion body with integrated Fly-Track. This makes it convenient to secure the box to lighting truss or speaker rigging with standard single stud rigging clips. The supply inlet is a 20-Amp 6 circuit SOCA connector that is connected with 12 Gauge wire to six (6) independent 20-Amp PowerCON TRUE 1 NAC3FPX outlets. On one end of the extruded housing is the Male SOCA connector with 3 of the NAC3FPX outlets on each side of the extrusion body. On the opposite end of the SOCA connector is a Fly-Track countersunk into the end of the extrusion body. This allows stability of the product when it is stood up on end for storage on a shelf or in a road case for packing. On each end of the extrusion there are single stud Fly-Clip positions enabling the box to be hung with bridles in multiple positions in a lighting truss. The rigging positions at the SOCA connector end of the extrusion provide a safety to secure the SOCA cable to the box while suspended in the air. If for any reason the rigger needs to disconnect the SOCA Cable from the distribution box, the rigger does not have to hang onto the cable. Simply choke a sling onto the SOCA cable and attach to the rigging points on our box as a temporary safety. This product is more than your average cable splitter. Maximum Dimensions: 254mm (10”) L X 139.4mm (5.488”) W X 59.69mm (2.35”) H.
