Power Cube® 4HX is a passive PowerCON (208-240 Volt A/C) Splitter device, containing no active components or supplementary circuit interrupter (breaker) devices inside. For public safety, The 4HX uses our proprietary custom aluminum extrusion body with built in integrated Fly-Track. This makes it convenient to secure the box to lighting truss or speaker rigging with standard single stud rigging clips. The supply inlet is a 20-Amp PowerCON NAC3MPA-1 connector that is parallel-connected with 12 Gauge wire to four (4) 20-Amp PowerCON NAC3MPB-1 outlets. On one end of the extruded housing is the PowerCON NAC3MPA-1 inlet with an NAC3MPB-1 outlet on each side of the inlet power connector. It also has a neon status indicator lamp, connected to the inlet connector. On the opposite end of the extrusion are the remaining two NAC3MPB-1 outlet connectors. Maximum Dimensions: 139.7mm (5.5”) L X 139.4mm (5.488”) W X 53.4mm (2.1”) H.
Submit a Review...
Click Add to Cart to order this product.
Email info@gearboxpro.comwith any questions about this or any of our other products.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.
.jpg "Power Cube® 4HX")
.jpg)
