COMBO II (SKU: 10023) The COMBO II adaptor box (similar to the Distro) breaks out an NL8 into four (4) NL2/combo connectors. Each of the NL2/combo connector contacts are connected to each of the four (4) contact pairs on the NL8 connector.
Features: The convenience of this adaptor box over the Distro is the flexibility of using NL4, NL2 or the traditional ¼” speaker cables to hook up your full range speaker cabinets.
|
|
|
COMBO / DISTRO (SKU: 10025) The COMBO/DISTRO has an NL4 that sends Pin 1+,1- to Pin 1+,1- on an NL4 and a parallel connected NL2/Combo connector. Then Pin 2+,2- is sent to Pin 1+,1- on an NL4 and a parallel connected NL2/Combo connector. Essentially a “Y” connection to each set of contacts on an NL4 connector.
|
|
|
QUAD (SKU: 10041) The QUAD is a simple NL4 ‘Y’ Splitter. Three (3) NL4’s parallel connected together. Applications: Primarily used for splitting an NL4 cable (paralleling Bi-amplified speakers).
|
|
|
DISTRO (SKU: 10042) This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
|
|
|
DISTRO II (SKU: 10043) DISTRO II
The Distro II is an adaptor box that breaks-out an NL8 into four (4) NL4’s. Each of the NL8 contact pairs connect to only Pin 1+, 1- of each of the four (4) NL4 connectors. This means that only full range speakers using pins 1+ and 1- can effectively be connect to the NL4’s.
|
|
|
DISTRO + (SKU: 10044) The Distro + is the same as the Distro II with the addition of a parallel connected NL8 providing pass through or daisy connectivity to continue on with an NL8 cable.
|
|
|
DISTRO / MATRIX (SKU: 10045) A DISTRO / MATRIX is equivalent to a pair of DISTRO’s in the same box, each of which are connected to one half of an NL8 connector. If nothing is connected to the NL8 you could use the DISTRO / MATRIX as two independent DISTRO’s.
|
|
|
M4-Distro/Matrix (SKU: 10047) The M4 DISTRO / MATRIX is similar to the DISTRO / MATRIX with the exception of the four (4) NL4 Neutrik breakout connectors opposite the NL8 input connector. Each of the NL8 contact pairs independently connect to one (1) of the four NL4 connectors opposite the NL8 input connector. Each of these NL4 connectors have Pin1+ parallel connected to Pin 2+ & their Pin 1- parallel connected to Pin 2- for use specifically for the d&b audiotechnik floor monitor speaker. The NL4’s on each side of the NL8 are each connected to one half of the NL8 respectively just like the Matrix product. If nothing is connected to the NL8 you could use this product as two independent M4 DISTRO’s by connecting to the NL4’s on each side of the NL8.
|
|
|
OCTO (SKU: 10081) The OCTO is a simple NL8 ‘Y’ Splitter. Three (3) NL8’s parallel connected together.
|
|
|
MATRIX (SKU: 10082) The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.
|
|
|
MATRIX II (SKU: 10083) The MATRIX II is an NL8 break out to a pair of parallel connected NL4’s. Each half of the NL8 has a parallel connected pair of NL4’s. This has the same pin wiring as a MATRIX with the convenience of an additional, second NL4 parallel connected to each of the NL4’s of a standard MATRIX.
|
|
|
MATRIX + (SKU: 10084) The Matrix + is the same as the Matrix with the addition of a parallel connected NL8 providing pass through or daisy connectivity to continue on with an NL8 cable.
|
|
|
DISTRO + / MATRIX + (SKU: 10085) The DISTRO + / MATRIX + contains a DISTRO + with the addition of connections to Pins 2+ & 2- on the first two NL4’s providing a matrix for two Bi-amp outputs from the NL8. The two NL4’s that are wired as a MATRIX have their Pin 1+, 1- connected to Pins 1 and 3 already to provide 4 full range speaker taps off of an NL8 cable. Therefore, the two NL4’s on the output side have their Pin 1+, 1- connected to pin 2 & Pin 4 of the NL8 connectors to complete the 4 DISTRO outputs.
|
|
|
M4-Distro (SKU: 10142) M4-Distro
This is similar to the Distro product with the exception of the NL4 output connectors which have Pin1+ paraelle connected to Pin 2+ and their Pin 1 paralle to Pin 2 for use speciffically for the M4 d&b audiotechnik for floor monitor speaker
|
|
|
RMK-2 (SKU: 10202) The RMK-2 is a convenient rack mount kit that raises the value of Cable Cube inventory. The RMK transforms them into a flexible, convertible amplifier rack patch panel. Depending on the direction a Cable Cube is loaded into the RMK, it will split or combine amplifier outputs. The RMK-2 accepts the following Cable Cube Profiles: OCTO, COMBO/MATRIX, DISTRO/MATRIX and the MATRIX+. The Cable Cube System of reversible modules & related RMK’s provide even greater flexibility in speaker cabling design.
|
|
|
RMK-4 (SKU: 10204) The RMK-4 is a convenient rack mount kit that raises the value of Cable Cube inventory. The RMK transforms them into a flexible, convertible amplifier rack patch panel. Depending on the direction a Cable Cube is loaded into the RMK, it will split or combine amplifier outputs. The RMK-4 accepts the following Cable Cube Profiles: TWIN, COMBO, QUAD, DISTRO and MATRIX. The Cable Cube System of reversible modules & related RMK’s provide even greater flexibility in speaker cabling design.
|
|
|
NEXO DISTRO (SKU: 10242) |
|
|
NEXO DISTRO II (SKU: 10247) SPECIAL ORDER
|
|
|
| NEXO DISTRO + (SKU: 10248)SPECIAL ORDER
|
|
|
SOCA F / MATRIX II (SKU: 16028) SPECIAL ORDER -- This SOCA - F / MATRIX ll is a SOCA style connector break-out box to two Neutrik NL8 connectors which also break out to two NL4's just like the Cable Cube MATRIX. The enclosure is a heavy duty, rugged aluminum extruded box with a convenient integrated fly-track to secure them to truss or speaker bumpers. There is also a convenient rigging point on each side of the SOCA connector to secure the connecting SOCA cable for added sagety. With the use of two small slings choked around the SOCA cable and fly-clips, you can bridle the safety's to the extrusion body. See further details shown in our Pin-out Chart download listed inteh top right corner of our web site.
|
|
|
